Multichannel Systems Roboocyte2 Manual - Manual (Page 62)

Roboocyte2 Manual
58
The Gilson Liquid Handler GX 271
If a Gilson Liquid Handler is connected and switched on, the "Liquid Handler" part of the
"Liquid Handling" tab page will become accessible. Please refer to the chapter "Setting up
the Gilson Liquid Handler"
With the Gilson Liquid Handler section you can control all functions of the GX-271 separately.
"Home" brings all parts of the GX-271 to home position; "Reset" has the same effect as
switching the Gilson on and off. "Up" brings the z-axis of the Gilson to the most upward,
zero position. The command "Tube" moves the z-axis above the selected tube AND moves
the z-axis together with the tip probe (if installed) deeply down into the tube.
Warning: If the wrong rack is selected, the tip probe can be easily destroyed.
Also be careful with your hands when you perform movements of the Gilson.