Multichannel Systems Roboocyte2 Manual - Manual (Page 112)

Roboocyte2 Manual
108
Browse through the folders to define the path for the export file. Switch from the window
"Available Columns" the desired columns to the window "Selected Columns" by clicking the
arrow buttons between both windows. To change the order of the selected options, please select
the respective option which will be highlighted in blue and use the arrow buttons on the right
side to change the position.
In the "Export Options" window, please decide whether you want to save the "Table" and / or the
"Result" in ASCII format, and / or the current "Trace", and / or the "Voltage" trace. Choose the
"Column Separator" from the radio buttons "Tab Delimited" and others in "Desired Characters".
Example: Select "Trace", deselect "Table" and "Results" and define a filename by click on
"Browse" button. If you chose "name" for the filename, the generated file will get the name
"name_Traces.dat" Click on "Ok" button will close the window and the selected trace is exported
as ASCII text. The ASCII columns are by default tab-delimited, but you can define other delimiters
if needed. The generated ASCII file will have the following format. Column 1 contains the time in
milliseconds, column 2 contains the current values in Nanoampere. Time (ms)::
Time(ms)_RecordingID-31 J(nA)_RecordingID-31. If you select more than one data trace for export,
additional columns will be generated with a separate time column for each trace.
Time(ms)_RecordingID-31 J(nA)_RecordingID-31
0,00 48,6
1,00 48,1
2,00 47,8
3,00 47,6
Selecting "Voltage" in addition will generate an additional column with the recorded voltage at
the voltage electrode: Time (ms)_RecordingID-33 J (nA)_RecordingID-33 U (mV)_RecordingID-33
Time (ms)_)_RecordingID-33 RecordingID-33 J (nA)_ RecordingID-33 U (mV)
0,00 3,3 -40,0
1,00 3,1 -40,0
2,00 -0,1 -40,0
3,00 -2,6 -40,0
4,00 -4,6 -40,0