Multichannel Systems Roboocyte2 Manual - Manual (Page 27)

Setting Up Hardware and Software
23
3.4 Installing the Software Roboocyte2
The operating system Microsoft Windows ® 7 (32 and 64 bit) or XP (with Service Pack 3) and the
Roboocyte2 software are already installed on the provided computer. However, you may need
to reinstall or update the Roboocyte2 software on the same or another computer. Please check
the system requirements if you are going to install the software on another than the provided
computer. MCS cannot guarantee that the software works properly if these requirements are
not fulfilled.
If you want to access the same data files on a network server from a second computer (for offline
analysis), you have to manually relink the original database from the second computer after the
program installation. A new database will be set up during program installation that you will not
need. Please see chapter "Linking to the Database" for more information.
Otherwise, it is possible that the installed software does not work properly.
Double-click Setup.exe on the installation volume.
The installation assistant will show up and guide you through the installation procedure.
Follow the instructions of the installation assistant until the installation is complete.
The Roboocyte2 software and the Microsoft Access database file (*.accdb) are installed
on your computer.