Multichannel Systems Roboocyte2 Manual - Manual (Page 51)

47
5 Manual Mode
5.1 About the Manual Mode
Although, the main purpose of the Roboocyte2 is the automated mode, almost all functions
can be accessed "manually". To open the manual mode, click on the toolbar symbol
or use the menu command "Tools", "Manual Mode..."
The "Manual Mode" dialog consists of three different tabs, the "Movement", the "Measurement"
and the "Liquid Handling", that means each tab is dedicated to a distinct group of application.
5.2 Manual Mode Movement
Click main menu “Tools” and select “Manual Mode” . Or click the tool bar icon .
The "Movement" tab page appears.
Note: Please use the manual movements of the Roboocyte2 for tests only!
First, perform an alignment before you click any button on the "Manual Mode" tabbed page
"Movement".