Multichannel Systems Roboocyte2 Manual User Manual
Page 53
Manual Mode
49
Functions in the "Plate Carrier" Section
All functions in the Plate Carrier section refer to functions of the carrier.
Click the "Reference" button to start a reference movement of the well plate carrier.
After performing a reference movement the well plate carrier stops at a defined zero-position.
Click the "Home"button to move the well plate carrier to the home (zero) position.
Click the "Park" button to move the well plate carrier to the park position
Click the "Resist. Pos" to move the well plate carrier to the resistance position
Click the "Well" button to move the well plate carrier to the selected well.
Click the "Air Cushion" button to start and stop the air supply for the carrier. When the
"Air Cushion" button is selected, the "Slow", "Fast" and "Arrow" buttons become active
and you can move the carrier in x and y direction.
"Air Pressure", "Resistance" and "Display" Section
Click the "Check" button in the "Air Pressure" window to control the air pressure. The result
is displayed in hPa (1000 hPa = 1 bar = 14.5 PSI = 750 Torr = 29.5 in Hg).