3setting up hardware and software, 1 setting up roboocyte2 hardware and software – Multichannel Systems Roboocyte2 Manual User Manual

Page 15

Text mode
Original mode

Setting Up Hardware and Software

3.1 Setting up Roboocyte2 Hardware and Software

Connect all cables as described below.

Warning: Carefully lay and secure the cords. Remember that someone could easily trip over
a loose cable.

Note: All electrical connections are clearly marked and the plug coding prevents confusion.
The cords should be plugged in without the use of excessive force

The following photo shows the rear panel of the Roboocyte2