Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 17)

Micro-PWC OPERATOR’S MANUAL
Introduction 3
by audible alarms. The optional annunciator display panel (ADP) and the other process alarms are cov-
ered in
Section 8 .
1.2.8 Events
System events occur when a problem or change-of-state is detected with the control system, as opposed
to abnormal conditions, problems, or changes-of-state associated with the process which is being moni-
tored. System event messages are displayed in the third line of the Mini-Alarm Window, the Event Review
display, and the Event Historian. System events are covered in
Section 9 .
1.2.9 Message Review
Operator messages are used to provide the operator with information and instructions for performing
actions, and can be generated from any Micro-PWC. Operator messages are displayed in the fourth line of
the Mini-Alarm Window and in the Message Review display, and can be accompanied by an audible alarm.
Message review is covered in
Section 10 .
1.2.10 Micro-PWC Utilities
A number of useful maintenance and information management functions are provided as Micro-PWC utili-
ties. Utilities covered in this manual include:
• CRT Print
• Release All Configuration Locks
• System Help
• User Help
• Quick Keys
• CRT Context Keys
These utilities are covered in Section 11 .
1.2.11 Printer Review
Messages which have been sent to a printer or to a file can be displayed using the Printer Review display.
Printer review is covered in
Section 12 .
1.3 Document Conventions
This document uses standard text conventions to represent keys, display items and user data inputs:
Display item Any item displayed on a screen appears as italic text. Example: Running
User data input
Bold Identifies any part of a command line that is not optional or variable and
must be entered exactly as shown.
Italic Identifies a variable parameter entered in a command line.
[ ] Brackets indicate an optional parameter; text within the brackets follows the
previously described conventions. For example:
CUP [port] [baud] [file_name.CSP]