Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 64)

4. Navigate to the location to which you want to save the file, then click Save.
5. Click OK in the Export Batch dialog box.
NOTE: When exporting a large batch and including the LXB files, such as a
batch with hundreds of wells or hundreds of analytes, the export
process may take ten minutes or more.
Editing a Batch
1. Open the Batches page.
2. Click the batch you want to edit, then click Edit. The Protocol tab opens.
3. Edit the information as needed on the Protocol, Std & Ctrls, and Plate Layout tabs.
4. Click Save on the Plate Layout tab.
Deleting a Batch
You can only delete unprocessed batches. Batches are deleted from the Open Batch list and
moved to the Open Incomplete Batch list.
To delete a batch:
1. Open the Batches page.
2. In the Pending Batches section, click the batch you want to delete, then click Delete.
The Delete Pending Batch dialog box opens.
3. Click Yes.
NOTE: You can remove a batch that includes results only through the
Archive Utility. See Archive Utility .
xPONENT ® for FLEXMAP 3D ®
50