Luminex IS Version 2.3 (IVD) - Manual (Page 27)

x MAP Technology Luminex 2.3 Software
PN 89-00002-00-254 Rev. B 17
Status Bar
The Status Bar displays information about the Command State,
Device Status, Device Activity, Laser Status, Total Events per
Second, and Region Events per Second. Color coding indicates the
urgency of each item’s status. Device Activity uses no color coding.
Figure 15 System Status Bar
Table 3 describes the types of status bar messages in relation to the
message color coding.
Table 3. Status Bar Color Coding
Category Color Indicates
Command
State Indicates communication status of the Luminex analyzer or
operations being processed
Green Idle or processing
Yellow Connecting, pausing, or paused
Red Disconnected or locked out
Device Status Indicates the current process of or warning about the
Luminex analyzer
Green Running or standby
Yellow Busy, pressurizing, sheath is empty, or warming
up
Red Not ready or disconnected
Device
Activity Indicates the activity that the Luminex analyzer is
performing.
Note: The device activity has no color code.