Luminex IS Version 2.3 (IVD) - Manual (Page 15)

x MAP Technology Luminex 2.3 Software
PN 89-00002-00-254 Rev. B 5
Favorites. You can use the Favorites list to create a list of often-
used commands and templates. Items appear in alphabetical order for
easy locating. For more information on setting up the Favorites list,
see page 40.
Button Groups. Button groups are grouped according to function.
• The Daily Startup group contains the Warmup, Prime,
Alcohol Flush, and Wash Commands. For more information
on daily startup, see page 41. For more information on the
commands, see the Commands section on page 29.
• The Instrument Calibration group contains the CAL1,
CAL2, CON1, and CON2 buttons. For more information on
calibrating the system, see page 43. For more information
about these commands, see the Commands section on page 29.
• The Batch Setup group contains the New Batch, New
Multibatch, and New Lot buttons. For more information on
creating and running batches and multibatches, see page 49.
For more information about these commands, see the
Commands section on page 29.
• The Reports and Analysis group contains the Analysis and
Print buttons. For more information on running reports and
analyses, see page 77. For more information about the
Analyses and Print commands, see the Commands section on
page 29. For IVD assays use the analysis recommended in the
IVD kit package insert instructions for use.
• The Daily Shutdown group contains command buttons that
you can use when shutting down the system. For more
information on performing a daily shutdown, see page 86. For
more information on the Sanitize and Soak commands, see the
Commands section starting on page 29.
Run Batch Tab The Run Batch tab contains a microtiter plate and reservoir image,
XYP and DD temperature readbacks, a sheath pressure gauge, print
button, command list displaying batch commands and their status,
and plate and XYP command buttons. See Figure 4.