Apple Xserve G5 - Manual (Page 7)

Xserve G5 Take Apart - 5 Hard Drive
Procedure
1. Make sure the drive being replaced is not in use by any application and is not being
shared by the server. (See the Mac OS X Server documentation for information about
shared drives.)
2. Unmount the drive (by using the command-line tools or by dragging the disk icon to
the Trash).
3. Press the handle on the front of the drive module so that the handle pops out.
4. Wait for the upper LED on the drive to go out. Then grasp the drive handle, and pull
the drive module out of the server.