Apple Xserve G5 User Manual

Page 21

Text mode
Original mode

Xserve G5 Take Apart -

PCI Riser

5. If you are replacing the riser, disconnect the PCI card(s) from the original riser and

transfer them to the new riser.

Warning: When removing or installing a PCI card, handle it only by the edges. Do not
touch its connectors or any of the components on the card. Lift the card straight out from
the connector to remove it, and insert it straight into the connector to install it. Do not rock
the card from side to side and don’t force the card into the slot. Once the replacement card
is installed, pull on it gently to check that it is properly connected.