Preparation for the connection, Product installation – CNB MDC4050VR User Manual
Page 4
4
Network Camera_ User manual
1. Preparation for the connection
1.1.
Product Installation
Brief information for rapid installation is provided in this section. For more detailed information you are
recommended to refer to pertinent documentations provided with the product.
1.
Apply Power to the product and connect the product with network cable.
Applying improper power to device can cause damage to the device.
Varieties of power supplying option are provided for each of the product. Please refer
to the manual of each specific product for available option.
2.
Install “IP installer (Ver.3.0.1 or above)” and “NVR-Pro (Ver.5.17 or above)” on your PC.
Each Program is included in the CD coming with product and can be downloaded from
www.cnbtec.com
.
Detailed information for installing these programs can be found in
[IP-Installer User’s Guide]
and
[NVR-Pro User’s Guide]
, respectively.
3.
Assign IP address to the product using IP installer IP Installer.
Identify the type of the network environment and set up IP address. Detailed process of setting up
IP address can be found in
[IP-Installer User’s Guide]
.
If network type is xDSL or Cable modem
you need supplementary information provided by your ISP.