CNB MDC4050VR - Manual (Page 17)

17
Network Camera_ User manual
Fig. 2-7. ISP Module Setup
Item Description
ISP
Control
WDR Set the WDR mode ON or OFF.
Anti Flicker
Synchronize the video frequency with Power Frequency of your
region to remove flickering. (OFF, 60Hz, 50Hz)
Slow FPS
Enhance the Video image under the low light condition by
controlling the shutter speed.
Sharpness
Adjust the sharpness of video. The higher, the better video image.
Video can be noisier with higher value.
Auto Iris Set the Auto Iris ON or OFF
2DNR Set 2 dimensional noise reduction value.
3DNR Set 3 dimensional noise reduction ON or OFF.
Exposure
compensation at night
Set function Exposure compensation at night in accordance with
the installation environment.
For the product with default automatic function, the selection is
deactivated.
Exposure Type
Change the camera exposure type.
AUTO : The exposure value is automatically adjusted.
SUTTER PRIO. : Only the shutter speed can be set and Gain value
will be adjusted automatically.
MANUAL : Sutter speed and Gain value can be set.
Set Shutter & Gain
In the case of exposure type with manual will be activated.
Sutter speed and Gain value can be set.
Restore original values Click on “CONFIRM” to restore the default settings.
SAVE Save the settings.