CNB MDC4050VR - Manual (Page 23)

23
Network Camera_ User manual
E-Mail
Setup
Using Built-in
SMTP Server
If you are using web mail services having no SMTP server, check the radio
button at the left of “Using Built-in SMTP Server” and enter active and
valid e-mail address to avoid spam filtering on the receiving e-mail server.
Using
External
SMTP Server
If you are using external mail server, fill in the fields with proper parameters.
Using SSL Check only for the request of using SSL during the Log On by SMTP Server.
E-Mail Port
No.
Use only for the changed use of default port of E-Mail Server.
FTP Server Setup
Setup IP address, Username, Password and Directory of FTP server to send
captured video data. Default FTP port number is 21.
SAVE
Save the setup parameters.
You must click on “SAVE” to apply the setting values.
2.11. Alarm Device Setup
Test the alarm output and describe the condition of alarm annunciation.
Fig. 2-11. Alarm Device Setup
Item Description
Alarm Device
Test
Test alarm devices. Click on On/Off for testing.
ON On the alarm output (close the relay contact)
OFF Off the alarm output (Open the relay contact)
Alarm Device
Active
Condition
Set up the condition of activating each alarm device. Select sensor or motion detection.
Name Logical name of the alarm device can be input into the box at the left.
Sensor When checked, alarm device is activated upon sensor input.
Motion
When checked, alarm device is activated upon Motion, Audio Detection
or PIR detection.