CNB MDC4050VR - Manual (Page 38)

38
Network Camera_ User manual
DISPLAY Display region for privacy mask.
ACTION
Move or Adjust the position and size of privacy mask by
selecting MOVE and ADJUST.
To adjust the size, select ADJUST and press the Focus Far
button, Adjust the size using PT Direction Key and
ave by pressing the Focus Far Button.
SAVE You must save after changing any setting.
Change the area of Sector configured on OSD Menu.
The character strings displayed by the Sector function can be changed
only through OSD Menu.
Delete the settings for Preset, Tour, Pattern, Privacy, or Sector
configured in the camera selectively or altogether.
Enable/disable display of Camera ID, Preset ID, Sector ID, and
Coordinate information.
Check/uncheck on small box at the left of each subment, then press the
SET button to configure.
Lock access to OSD Menu.
Enter password which is a number from 1 to 200. Then press SET
button. Activate/deactivate the System Lock by pressing the LOCK
button.
If you want to go into OSD Menu under the System Lock Status, you
need to perform Goto Preset to selected number for password.
Restart the Camera Module and start operation.