E-mail & ftp setup – CNB MDC4050VR User Manual
Page 22
22
Network Camera_ User manual
Day
Select Date
Time
Set time begin and end time. The time can be set in the increment of
30 minutes.
SAVE
Save the setup parameters.
You must click on “SAVE” to apply the setting values.
2.10.
E-Mail & FTP Setup
Configure E-mail and FTP connection information.
Fig. 2-10. E-mail and FTP Setup
Item
Description
Setup
Notify for IP
Change
If you check this, the IP address will be sent via E-mail whenever the
IP address changes. It is sent to the E-mail address set in
“Recv E-Mail Address”.
Recv E-Mail
Address
Enter destination E-mail address to send information from your product.
Return E-Mail
Address
Fill in this field with active and valid e-mail address to identify sender of the
e-mail. Typical e-mail address will be the e-mail address of the owner or the
administrator.
Note that the e-mail message from the product might not pass through the
SPAM filter of the receiver’s e-mail server, when this field is not filled in with
active e-mail address.