CNB MDC4050VR - Manual (Page 35)

35
Network Camera_ User manual
3.4. PTZ Control Menu
You can control the PTZ of PTZ-enabled product by using PTZ menu control buttons on the Web Viewer.
Item Description
Camera Position Control
Pan/Tilt control
Zoom In
Zoom Out
Focus Far
Focus Near
Enter into OSD menu for camera setting.
In the OSD menu, use Up/Down buttons to navigate through the menu item on
the screen.
Depending upon the situations Left/Right buttons will perform one of the
followings.
1. Change parameter value in each submenu.
2. Decrement/increment the numbered value.
3. Go into lower level menu trees.
4. If clicked when the cursor is on “EXIT”, upper menu will be activated or OSD
menu mode will be finished.
For more detailed information, refer to the product manual.
If the product can’t support the OSD menu, “Menu” button is disabled.
After activating this mode, the camera will move so that the clicked point on the
video is located at the center of the video. display.
Left : Deactivated.
Right : Activated.
Iris Control
Set Pattern
Set Tour
Set Preset
GOTO Preset
Run Pattern
Run Tour
Run Scan