CNB MDC4050VR - Manual (Page 21)

21
Network Camera_ User manual
Video
Capture
Condition
Audio
Detection
Select
Enable/Disable Audio Detection event. Transmission methods applied
for motion event is applied for transmission.
Transmission
Method
Select a way of sending captured video
E-Mail
Transmission
Transmit to the desired E-mail address configured at
[Network Configuration]
FTP
Transmission
Transmit to the desired FTP Server configured at
[Network Configuration]
Built-in
Storage
Save the video into built-in SD Card.
Play Alarm
Sound
Generate Alarm Sound through Speaker. This function is only available
in the products having built-in Speaker.
MOTION
SETUP
Move to Set-Up Menu for configuring Motion Detection Zone.
Pre-Post
Recording
Time
E-Mail /
FTP
Total 20 second of video data is transmitted through E-mail.
Post recording time is automatically adjusted in accordance with the
pre-recording time.
Built-In
Storage
Pre and Post recording time is independently configurable when
recording into built-in SD card. The Pre-Recording can be selected from
5, 10, 15 sec, while post-recording time can be selected from 10, 15,
20, 30, 60 sec.
SAVE
Save the setup parameters.
You must click on “SAVE” to apply the setting values.
SD Card
Management
SD Card
Format
Format the SD Card for Use.
All New SD Card need to be formatted at least 1 time.
SD Card
Status
Display the status of SD Card on the product.
Detected : SD Card is recognized.
Not Exist : No SD Card or Not Recognized.
Error : Unable to use SD
SD Card
Unmount
Unmount the SD Card to eject the SD Card safely. To prevent the Data
Loss and damage of SD Card, you must do the Unmount procedure
before ejecting the SD Card.
SD Card Usage Display the Usable/Used Space of SD Card.
Schedule
Alarm Setting
Configure event schedule.
Type
Select type of event to set schedule among Continuous Recording,
Sensor, Motion Detection.