CNB MDC4050VR - Manual (Page 20)

20
Network Camera_ User manual
2.9. Sensor & Capture Setup
This is the setup mode for sensors and video capture conditions. Captured video can be sent to user by
FTP or (and) E-mail, or stored on local storage.
Fig. 2-9. Sensor & Capture Setup
Item Description
Sensor Setup
Sensor 1
Select sensor type. There are two types of sensors which are
Normal Open and Normal Close.
Name Input logical name of the sensor.
Video
Capture
Condition
Set events initiating video capture for FTP, E-mail or storing in the local storage.
Sensor
Detection
Select
Enable/Disable Sensor event. Selected transmission is initiated only
when sensor is activated. Select desired transmission methods for
sensor event.
Motion
Detection
Select
Enable/Disable Motion Detection event. Select desired transmission
methods for motion event.