CNB MDC4050VR - Manual (Page 16)

16
Network Camera_ User manual
2.7. Video Setup
You can adjust the parameters of input video. Note that parameters will vary in accordance with the
camera module employed.
Fig. 2-6. Video Setup
Item Description
Video
Control
Contrast Adjust contrast. Default is 50.
Brightness Adjust Brightness. Default is 50.
Saturation Adjust saturation. Default is 50.
Hue Adjust hue. Default is 50.
Power Line
Frequency
Select frequency of the power.
Power frequency can be different by each country. Correct one must
be choose for frequency
It can be selectable 50Hz or 60Hz. Default is 60Hz.
OSD Time Display
Enable/disable OSD time display and allocate the position of OSD
display.
Blind
Blind out some part of the video. Select the color for Blind mask. After
the color is selected, position the mouse to one corner then click and
drag the mouse to desired position and release button to select the
area.
SAVE Save the settings.
Restore original values Click on “CONFIRM” to restore the default settings.
ISP Module Adjust Adjust the ISP module. Click to initiate..