CNB MDC4050VR - Manual (Page 12)

12
Network Camera_ User manual
2.4. Network Setup
Setup the network parameters appropriately in accordance with your network environment. Many of the
parameters in this mode are same as those set up by “ IP-Installer ”.
Fig. 2-4. Network Setup
Item Description
IP Assign
Type
The network types supported by the products are LAN(fixed IP), PPPoE, and
DHCP(automatic IP allocation).
Static IP Setup
When the network environment is fixed IP, select ‘LAN’ in the network
type, and input the IP address, Subnet Mask, Gateway, DNS1 and
DNS2. Ask your network administrator or ISP for the information.
DNS2 is used when DNS1 does not work.
#. When you change the DNS, you should restart the camera
to apply the DNS.
PPPoE Setup
When the network environment is PPPoE with automatic IP address
assignment, select ‘PPPoE’ in the network type and fill in the ‘User
Name’ and ‘Password’ fields with the values given by your ISP. It is for
the use with ADSL modem.