CNB MDC4050VR - Manual (Page 24)

24
Network Camera_ User manual
Duration Set the duration of Alarm annunciation.
SAVE
Save the setup parameters.
You must click on “SAVE” to apply the setting values.
2.12. Motion Detection Setup
Set the motion detection regions. Up to 3 regions can be defined.
Fig. 2-12. Motion Detection Region Setup
Item Description
Channel Sensitivity
Set the sensitivity of motion detection for each channel. Default is 6.
The Higher the value, the higher the sensitivity.
Note that false motion alarm can be generated if the sensitivity is set to
be unnecessarily high. You are recommended to set the sensitivity to most
appropriate value after test.
Motion
Region
Up to 3 motion detection zones can be configured.
Region Click on “SELECT”, then click & drag on the Video to select the region.