CNB MDC4050VR - Manual (Page 39)

39
Network Camera_ User manual
4. Trouble Shooting and Tips
4.1. Trouble shooting after installation
4.1.1. Neither channel name nor video is shown up and eventually timeout message is sho
wn
up.
1. Check the power and network connection of device.
To check if the network is properly operating, open the browser and try to connect to any server.
Example) http://www.google.com
Or open the MS-DOS Prompt and type the following
ping www.google.com
Then press Enter. If you see the “ Reply from … ” message it means that the network is working
properly. To check if the device is connected, open the MS-DOS Prompt and type the following
ping [the IP of the server]
Example) ping 192.168.1.112
2. If you see the “ Reply from …” message, it means that the server is properly connected.
If you do not see a Reply message, check if the network cable and power cable are properly
connected.
1 2