CNB MDC4050VR - Manual (Page 27)

27
Network Camera_ User manual
2.14. PTZ Setup
PTZ Setup is available on the models having Pan/Tilt/(Zoom) functions. You can configure PTZ
parameters using Web Viewer or NVR-pro, too.
Fig. 2-14. PTZ Setup
Item Description
PTZ Model
Selection
Select the Protocol which is used by PTZ Camera.
Delete Button Delete the displayed PTZ Protocol.
PTZ Device ID
Your PTZ device needs an ID. Input ID in this field.
Click on SAVE to save the ID.
If PTZ ID does not match, it won’t operate normally.
PTZ Baud Rate
Configure the RS-485 Baud Rate for PTZ control.
If the PTZ Baud Rate does not match, it won’t operate normally.
PTZ Operation
Check
Speed Select this RADIO button to set the speed of the PTZ operation.
Step Select this RADIO button to set the step size of PTZ operation.
PAN Move the slider to adjust the speed or step in panning.
TILT Move the slider to adjust the speed or step in tilting.
ZOOM Move the slider to adjust the speed or step in zooming.