GF Signet 2760 DryLoc pH_ORP Preamplifier and Connectors - Manual (Page 7)

7 Signet 2760 DryLoc pH/ORP Preamplifi er
Wiring from 2760 DryLoc Connectors to Other Manufacturer's Equipment
DryLoc Connector, Submersible
3-2760-3
3-2760-4 DryLoc Connector, In-Line
3-2760-31
3-2760-41
The 2760-3/4 Connectors can be used to interface other manufacturer's instruments to these Signet DryLoc pH and ORP electrodes.
The instrument must be able to process a UNAMPLIFIED mV signal from the pH or ORP electrode. Several different temperature devices
are available.
Refer to the manufacturer's manual for wiring details. Other products may use different terms to identify the function of each conductor.
To any
instrument
with internal
amplifi er and
matching
temp device.
White RTD (Temperature)
Green RTD (Temperature)
Blue Solution Ground
Shield Earth Ground
Black Electrode Reference
Red (Active mV, pH/ORP)
Brown (no connection)
White R
T
D (T
emperature)
Green R
T
D (T
emperature)
Blue Solution Ground Shield Earth Ground Black Electrode Reference Red (Active mV
, pH/ORP)
Brown (no connection)
Signet Combination pH Electrodes
3-2724-10 (3 KΩ, NPT)
3-2724-11 (3 KΩ, ISO)
3-2726-10 (3 KΩ, NPT)
3-2726-11 (3 KΩ, ISO)
3-2726-HF-10 (HF Resist, 3 KΩ, NPT)
3-2726-HF-11 (HF Resist, 3 KΩ, ISO)
3-2726-LC-10 (Low Cond, 3 KΩ, NPT)
3-2726-LC-11 (Low Cond, 3 KΩ, ISO)
3-2774 (3 KΩ TC)
3-2776 (3 KΩ TC)
Combination ORP (Redox) Electrodes
3-2725-60 (10 KΩ ID, NPT)
3-2725-61 (10 KΩ ID, ISO)
3-2757-WT (10 KΩ ID)
3-2775 (10 KΩ ID)
3-2775-1 (no Temp Comp)
3-2777 (10 KΩ ID)
3-2777-1 (no Temp Comp)