Burkert Type 8035 - Manual (Page 53)

53
Installation and commissioning
Type 8025/8035 /
9.5. choosing the display language
When the device is energized for the first time, the display language
is English.
LANGUAGE ENGLiSh
DEUtSCh
FRANçAiS
itALiANO
0......9
→
the chosen lan-
guage is active
as soon as the
ENTER key is
pressed.
UNit
Fig. 49: Diagram of the "LANGUAGE" parameter of the
Parameters menu
→
If you do not want to adjust another parameter, go to the "END"
parameter of the Parameters menu and press
ENTER
to save the
settings and go back to the Process level.
9.6. entering the k factor of the fitting
used
The device determines the flow rate in the pipe using the fitting K
factor.
The K factor of the fitting used can be entered here.
The K factor of the fitting used is in the operating instruc-
tions of the fitting.
The operating instructions of the Bürkert fittings can be
found on the CD delivered with the device or on the internet
at:
www.burkert.com .
English