Burkert Type 8035 - Manual (Page 28)

28
Wiring
Type 8025/8035 /
8.4.3. Wiring the 8025 compact version and the 8035, 12-36 V Dc, without relays, with
cable glands
→
Before wiring the device, configure the selectors on the electronic board (see chap. "8.3").
Supply
12..36Vdc
FLOW SENSOR
COIL NPN
L+ L- PE P- P+ NC
L+ L- PE P- P+ Iout
PULSE
OUTPUT
Without
With Relays
PE
3
2 1
A
terminal block 1
NC: not connected
L+: positive power supply
L-: negative power supply
PE: wiring of the PE between the main board and the protection board
P-: negative pulse output
P+: positive pulse output
terminal block 2 pe
Wiring of the cable shields
connector 3: connection of the flow sensor
Switch A : see chap. "8.3.1"
Fig. 23: Terminal assignment of a 12-36 V DC compact version without relays, with cable glands
English