Atec Agilent-16700 Series - Manual (Page 91)

91
State/Timing Modules Specifications and
Characteristics
Agilent Technologies 16715A, 16716A, 16717A, 16740A, 16741A, 16742A,
16750B, 16751B, 16752B Supplemental Specifications* and Characteristics (continued)
State Mode 16715A, 16716A, 16717A 16740A, 16741A, 16742A
167 Mb/s State Mode 16750B, 16751B, 16752B
200 Mb/s State Mode
Trigger sequence level branching 4 way arbitrary “IF/THEN/ELSE” branching 4 way arbitrary “IF/THEN/ELSE” branching
Trigger position Start, center, end, or user defined Start, center, end, or user defined
Trigger resources 16 Patterns evaluated as =, ≠, >, <, ≥, ≤ 16 Patterns evaluated as =, ≠, >, <, ≥, ≤
15 Ranges evaluated as in range, not in range 15 Ranges evaluated as in range, not in range
(2 Timers per module) -1 (2 Timers per module) -1
2 Global counters 2 Global counters
1 Occurrence counter per sequence level 1 Occurrence counter per sequence level
4 Flags 4 Flags
Trigger resource conditions Arbitrary Boolean combinations Arbitrary Boolean combinations
Trigger actions Goto Goto
Trigger and fill memory Trigger and fill memory
Trigger and goto Trigger and goto
Store/don’t store sample Store/don’t store sample
Turn on/off default storing Turn on/off default storing
Timer start/stop/pause/resume Timer start/stop/pause/resume
Global counter increment/reset Global counter increment/reset
Occurrence counter reset Occurrence counter reset
Flag set/clear Flag set/clear
Store qualification Default and per sequence level Default and per sequence level
Maximum global counter 16,777,215 16,777,215
Maximum occurrence counter 16,777,215 16,777,215
Maximum pattern/range width 32 bits 32 bits
Timers value range 100 ns to 5497 seconds 100 ns to 5497 seconds
Timer resolution 5 ns 5 ns
Timer accuracy 10 ns + .01% 10 ns + .01%
Timer reset latency 70 ns 70 ns
Data in to trigger out (BNC port) 150 ns, typical 150 ns, typical
Flag set/reset to evaluation 110 ns, typical 110 ns, typical
* All specifications noted by an asterisk are the performance standards against which the product is tested.