Atec Agilent-16700 Series - Manual (Page 16)

16
Probing Solutions
Technologies
Advantages Limitations
Very reliable connections. Requires advance planning in the design stage.
Saves time in making multiple connections. Requires some dedicated board space.
Moderate incremental cost.
Figure 3.8. NEW Agilent’s soft-touch
connectorless probes provide high-density,
low capacitive loading, and high reliability,
without requiring a connector.
High-density probing solutions
Model Description Requires kit of 5 Usable with
number connectors and 5 shrouds logic analyzers
E5385A 100-pin probe with built-in isolation networks 16760-68701 All that use 40-pin 3M-style
for the logic analyzer mid-cable connector
E5346A 34-channel, 38-pin probe with built-in E5346-68701 All that use 40-pin 3M-style
isolation networks for the logic analyzer. mid-cable connector
E5351A 34-channel 38-pin adapter cable, requires logic E5346-68701 All that use 40-pin 3M-style
analyzer isolation networks on the target. mid-cable connector
E5339A 34-channel 38-pin low-voltage probe with built-in E5346-68701 All that use 40-pin 3M-style
isolation networks for the logic analyzer. Designed for mid-cable connector
signals with peak-to-peak amplitude as small as 250 mV.
E5378A 34-channel 100-pin single-ended probe 16760-68701 All that use 90-pin high-density
mid-cable connector
E5379A 17-channel 100-pin differential probe 16760-68701 All that use 90-pin high-density
mid-cable connector
E5380A 34-channel 38-pin single-ended probe E5346-68701 All that use 90-pin high-density
mid-cable connector
E5387A 17-channel differential soft touch connectorless probe Kit of 5 retention modules All that use 90-pin high-density
supplied with probe. Part number mid-cable connector
for additional kit of 5: E5387-68701
E5390A 34-channel single-ended soft touch connectorless probe Kit of 5 retention modules All that use 90-pin high-density
supplied with probe. Part number mid-cable connector
for additional kit of 5: E5387-68701
Designing connections
into the target system