Atec Agilent-16700 Series - Manual (Page 30)

30
Probing solutions to match the
measurement capabilities
Multiple probing options are
available for the Agilent 16753A,
16754A, 16755A, 16756A, and
16760A. Each probe can be ordered
by its individual model number.
Some probes are also available as an
option to the logic analyzer module.
The following table indicates both
the model number and the
option number.
Probes are not supplied as part of
the standard logic analyzer module.
Probes must be ordered separately,
either as options to the logic analyzer
module or individually by their
respective model numbers.
Data Acquisition and Stimulus
State/Timing Modules
Agilent Model Number Module Option Number Description Notes
E5378A 010 100-pin single-ended probe Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5379A 011 100-pin differential probe Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5380A 012 38-pin single-ended probe, compatible Maximum state analysis speed is 600 Mb/s.
with target systems designed for the Minimum input amplitude is 300 mV p-p.
Agilent E5346A Mictor adapter cable Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5382A 013 17-channel, single-ended flying lead
probe set
E5381A 17-channel, differential flying lead
probe set
E5387A 17-channel, differential soft touch Includes 5 retention modules
connectorless probe
E5390A 34-channel single-ended soft touch Includes 5 retention modules
connectorless probe
Connector and shroud kits for probes
For probe model number For PC board thickness Probing connector kit part number
(each contains 5 mating connectors and 5 support shrouds)
E5378A Up to 1.57 mm (0.062") 16760-68702
Up to 3.05 mm (0.120") 16760-68703
E5379A Up to 1.57 mm (0.062") 16760-68702
Up to 3.05 mm (0.120") 16760-68703
E5380A Up to 1.57 mm (0.062") E5346-68701
Up to 3.18 mm (0.125") E5346-68700