Atec Agilent-16700 Series - Manual (Page 115)

115
Pattern Generation Modules Specifications
and Characteristics
Agilent E8141A LVDS Data Pod
Output type 65LVDS389 (LVDS data lines)
10H125 (TTL non-3-state channel 7)
3-state enable positive true TTL; no connect=enabled
Maximum clock 300 MHz
Skew typical < 1 ns; worst case = 2 ns
Recommended lead set: E8142A
Recommended lead set Agilent 10498A
10 K Ω
65LVDS389
ENABLE
°
3.3 V
LVDS DATA OUT
3-STATE IN TTL
Agilent 10476A 3-State 1.8 Volt Data Pod
Output type 74AVC16244
3-state enable negative true, 38 K Ω to GND, enabled on no connect
Maximum clock 300 MHz
Skew [1] typical < 1.5 ns; worst case = 2 ns
Recommended lead set Agilent 10498A
Agilent 10483A 3-State 3.3 Volt Data Pod
Output type 74AVC16244
3-state enable negative true, 38 K Ω to GND, enabled on no connect
Maximum clock 300 MHz
Skew [1] typical < 1.5 ns; worst case = 2 ns
Recommended lead set Agilent 10498A
74AVC16244
74AVC16244
[1] Typical skew measurements made at pod connector with approximately 10 pF/50 K Ω load to GND; worst case
skew numbers are a calculation of worst case conditions through circuits. Both numbers apply to any channel
within a single or multiple module system.