Atec Agilent-16700 Series - Manual (Page 81)

81
IntuiLink
Programming Examples Provided with IntuiLink
Visual Basic Examples have been included for use with Visual Basic 5.0
or higher. These examples perform simple functions such
as: system checks, oscilloscope measurements, pass/fail
tests using stored configuration and pattern generator
stimulus files, and stimulus/response tests. They also can
capture and retrieve data for off-line analysis.
Visual C++ Examples have been included for use with Visual C++ 5.0 or
higher to perform simple functions such as: system check,
capturing and retrieving data for off-line analysis.
LabVIEW An instrument library has been included for use with
LabVIEW 5.1 or higher. This library contains five LabVIEW
samples that provide a starting point for creating your own
LabVIEW programs.
• Load/Run/Save - loads a configuration, runs a
measurement, then saves results to a file
• Analyzer Listing - runs the logic analyzer and displays
data in a table
• Pass/Fail - runs the logic analyzer and compares the
measurement data against a standard
• Scope Waveform - runs the oscilloscope module and
displays waveform data
• Scope Measurements - runs the oscilloscope module
and displays a number of oscilloscope measurements
HP VEE An instrument library has been included for use with
HP VEE 5.0 or higher that provides a starting point for
creating your own application.
• Load/Run/Save - loads a configuration, runs a
measurement, then saves results to a file
Mainframe Specifications and
Characteristics