Franklin Fueling Systems T5 Series Fuel Management System Installation Guide - Manual (Page 5)

5
Product Description
The TS-5, TS-550 and TS-5000 are modular, automatic, continuous monitoring systems that use plug-in modules to
perform a wide variety of functions. Plug-in modules now allow you to custom design your system to meet your needs by
only purchasing those functions that you require, and expand your system later for greater capabilities.
The flexibility that this system offers is made possible through the communication of the CM (Controller Module)
to other modules across the CAN (Control Area Network) bus. The CAN technology used in these consoles is the
same standard architecture that the automotive industry employs because of its speed and reliable data transmission
rates. These advances in console design allow INCON’s TS-5XXX consoles, depending on model type and chosen
configuration, to complete the three primary applications of a modern fueling station: Fuel Management Systems (FMS),
Vapor Recovery Monitoring (VRM) and Secondary Containment Monitoring (SCM).
All consoles come standard with a Controller Module (CM), a Power Supply Module (PS), and these features
(except for the TS-EXPC):
• Generates reports automatically in response to preset/programmed conditions and alarms
• Provides audio-visual annunciation when an alarm or warning condition exists
• Performs inventory monitoring
• Is able to print reports on an external printer using Hewlett-Packard’s Printer Control Language (PCL) interface
• Can communicate via Ethernet, RS-232, RS-485 or an optional internal fax/modem.
TS-5000
The INCON model TS-5000 is a modular, automatic and continuous monitoring system that is also the most versatile and
capable console in the TS-5XXX series. The TS-5000 retains all of the features of the smaller models, but, because of its
large module capacity, the TS-5000 is ideal for larger market stations. The TS-5000:
• Has eleven (11) open slots for additional modules that can be used to greatly expand its capabilities
• Can support a combination of up to: ◦ 36 probes (or three Probe Modules)
◦ 36 2-wire sensors (or three 2-Wire Sensor Modules)
◦ 24 3-wire or 2-wire sensors (or three 3-Wire Sensor Modules)
◦ 24 relay outputs (or three Relay Modules)
◦ 24 4-20mA inputs (or three Analog Input Modules)
◦ 36 AC inputs (or three AC Input Modules)
• Optional touch screen LCD monitor
Example Station: Your station has 16 Submersible Pumps (2 Relay Modules), 24 Tanks (2 Probe Modules), 16 Lines (2
Analog Input Modules & 2 AC Input Modules), and 36 Sensors (3 Sensor Modules) all monitored and
controlled from one console mounted on the wall.
TS-550
The INCON model TS-550 is a mid-size console that will appeal to a wide variety of users. The TS-550 has all of the
standard features of the TS-5000 and:
• Has six (6) open slots for additional modules that can be used to expand its capabilities to support sensors, detect line
leaks, perform VRM functions and much more
• Can support a combination of up to: ◦ 36 probes (or three Probe Modules)
◦ 36 2-wire sensors (or three 2-Wire Sensor Modules)
◦ 24 3-wire or 2-wire sensors (or three 3-Wire Sensor Modules)
◦ 24 relay outputs (or three Relay Modules)
◦ 24 4-20mA inputs (or three Analog Input Modules)
◦ 36 AC inputs (or three AC Input Modules)
• Optional touch screen LCD monitor
Example Station: If your station has 8 Submersible Pumps, 12 Tanks, 8 Lines and 24 Sensors, you could control all of
it with your FFS TS-550 and six plug-in modules: a Relay Module, a Probe Module, an Analog Input
Module, an AC Input Module and two Sensor Modules.