Appendix c: compatible printers, Appendix d - standard products table, Appendix e - typical tank leak test times – Franklin Fueling Systems Colibri CL6 Setup and Operators Guide User Manual
Page 27: Hewlett packard compatible printers
27
Appendix C: Compatible Printers
Hewlett Packard Compatible Printers
Colibri consoles have a standard Type-A USB socket on the bottom of the console. The console uses Printer Control
Language (PCL) version 3 or higher protocol developed by Hewlett Packard (HP) to print to external printers.
Colibri consoles have two standard Type-A USB sockets on the bottom of the console. The console uses Printer Control
Language (PCL) versions 3 through 5 protocols developed by Hewlett Packard (HP) to print to external printers.
PCL 6 is not compatible with the Colibri consoles. However, many printers with PCL 6 can also support PLC 5. It is also
important to note that PCL 3 GUI is a subset of PCL 3 and is not compatible with the Colibri consoles.
Franklin Fueling Systems recommends the following HP printers:
• HP Deskjet 6940
• HP LaserJet P1505n.
Important Note
• Do not use printers with a power save feature
• Start the printer before starting the console
Appendix D - Standard Products Table
Product Name
API Gravity (6B Compensation)
Leaded Regular
63.5
Unleaded Regular
63.5
Unleaded Plus
62.8
Unleaded Extra
62.8
Unleaded Super
51.3
Diesel
32.8
Kerosene
41.8
#2 Fuel Oil
32.8
Appendix E - Typical Tank Leak Test Times
For 7 Tank Sizes at Half Capacity ( Worst Case is 50% Full )
Tank Size in Gallons
Typical - Tank Leak Test Times (to Finish)
4,000
2.0 hours
6,000
3.0 hours
8,000
4.0 hours
10,000
5.0 hours
12,000
6.0 hours
15,000
7.5 hours
20,000
8.0 hours
Note: The Leak Threshold value is one half of the Leak Test value.