beautypg.com

Franklin Fueling Systems Colibri CL6 Setup and Operators Guide User Manual

Page 10

background image

10

Select each grade and assign a name (i.e. Unleaded

Regular).

4. Enter the number of fueling points. In this example

there are 4.

5. Select Fueling Point 1 and program the number of

hoses. For this example there are 3 available grades

at FP1 and FP2. (number of hoses =3)

and 4 grades available at FP 3 and 4 (number of

hoses = 4). Continue to enter the number of hoses

for each fueling point.

6. After the number of hoses are programmed, push

the auto-configuration button for fueling point 1.

This will allow the console to automatically program hose

information (grade association and position) for the Fueling

points based on information received from the D-box.

7. Follow the instructions on the screen.

Note: Dispensing small amounts of fuel from each hose

is required before copying the information to other

fueling points that have the same number of hoses.

Run Autoconfigure before copy.
Confirmation Screens:

This will allow the console to verify grade and fueling point

assignments.