Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. C - Manual (Page 56)

Tank Sentinel Reports Page 3 - 21 3
Alarm Reports (Continued... )
All Alarm History REPORT
Shows the history of all active, cleared and transient alarms
for all alarm types (System, Tank, Sensor, Line, or ALL). The
example to the left is an ALL — Alarm History report. It can
hold up to 50 alarms in the alarm history memory buffer. The
total number of alarms to print can be reduced to conserve
paper ...please see the
Changing the Number of Reports
to Print topic earlier in this Chapter).
Changing the Number of Alarms to Print (in the
Alarm History Report)
Initially, the maximum number ( NN ) of alarms that can print
will be displayed. They are listed in chronological order with
the current alarms at the top and recent alalrms following in
order. The following display is shown when more than one
alarm can print:
Using the keypad, input a new number and press the ENTER
key to reduce the number of alarms to print (to conserve
printer paper) – or – simply press
ENTER to accept the
value displayed.
ENTER NUMBER OF ALARMS: NUMERIC
NN BACKSPACE
M1 M2 M3 M4