Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. C - Manual (Page 24)

1 Page 1 - 14 Tank Sentinel Operator’s Guide
Upgrade Menu
Additional features can be added by Ordering a TS-UPGRADE (For example, a TS-FM2 Fax
Modem can be added). Hardware must be added to the Tank Sentinel system just before
the upgrade is performed. Because setup programming is required once an upgrade is
performed,
INCON recommends that you contact your service provider to perform all
upgrades for you.
+
WARNING DO NOT attempt an upgrade without the correct upgrade password
and the 3 upgrade strings (codes). These will be sent to you (see example on the next
page).
Repeated upgrade attempts that fail will damage the equipment – avoid
unauthorized upgrade attempts !
Instructions and unique password and upgrade strings will be mailed to you on
receipt of:
1) A valid Purchase Order
2) A console Model number and valid Serial Number (verify that it is correct)
3) Hardware requirement(s) ...what equipment is going to be added
4) Software requirement(s)
5) Your Name and Shipping Address
Note: a FAX -transmittal can be sent to you upon request... provide your Fax
number
The upgrade instruction document that is sent to you is serial-number specific (see the
sample on the next page).
The upgrade will not work with any other console. Also,
upgrade codes can only be used once !
Once data entry has begun you may edit by pressing M1 and M2 to move left and right and
M4 to BACKSPACE. The shift key will change the keypad from NUMERIC to A...M for
entering the letters. See the previeous page for a review of the keypad and
ACK SHIFT key.
Verify that the input password and the three upgrade strings are correct before you
press the
ENTER key !
H U
MENU
7
SELECT MENU OPTION
SETUP UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
LEFT RIGHT
NOTE
☞