Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. C - Manual (Page 25)

Console – Basic Operation Page 1 - 15 1
INTELLIGENT CONTROLS INC http://www.intelcon.com
74 INDUSTRIAL PARK RD SACO ME 04027 U S A
Tank Sentinel

Sample
TS-UPGRADE
000-1368 Rev. B
Field Upgrade Instructions
Here is the field upgrade you purchased for the Tank Sentinel listed below. Please take a moment
to read the instructions before you begin the upgrade process.
Note: Some upgrades require new hardware to be installed in the Tank Sentinel (e.g. printer,
modem... etc.). This should be done prior to performing the upgrade.
REMEMBER: The number of attempts to upgrade is limited, and improper or unauthorized
attempts will damage your Tank Gauge.
This area will contain your:
MODEL:
SERIAL #:
OLD CONFIGURATION:
NEW CONFIGURATION:
UPGRADE PASSWORD:
UPGRADE STRING 1:
UPGRADE STRING 2:
UPGRADE STRING 3:
EXECUTING FIELD UPGRADE:
1.) Compare the model and serial number from these instructions to the ones shown on the label
on the left side of your unit. Make sure they are the same. Contact INCON if they are
different.
2.) Press the MENU key and select the UPGRADE option.
3.) The warning message will appear on the display for several seconds, and the unit will ask you
to enter a password. Enter the password shown in the box above and press the ENTER key.
Note: Once data entry has begun you may edit by pressing M1 and M2 to move left and right
and M4 to BACKSPACE. The ACK SHIFT key will change the keypad from NUMERIC to A...M
for entering the letters.
Continued next page...
E-mail: tech@intelcon.com FAX 1-207-282-9002 TEL 1-800-984-6266 PAGE 1 of 2
sales@intelcon.com FAX 1-207-283-0158 TEL 1-800-872-3455
Sample Upgrade Instructions (Page 1 of 2)