Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. C - Manual (Page 19)

Console – Basic Operation Page 1 - 9 1
Special Keys ( A
LSO SEE THE
G
LOSSARY
)
Pressing the ALARM key will
display the types of alarms:
SYSTEM TANK SENSOR LINE
and ALL alarms (ALL is shown if
the
DOWN key is pressed).
Press a menu key under one of
these types to display a status
group to choose from (Active,
Cleared, or History).
Also see the ACK SHIFT key
about how to acknowledge
alarms.
The annunciator may be programed to pulse (modulated) or to output a continuous
(solid) tone for certain alarms.
In addition, alarms, deliveries, and leak test results
could be sent to remote locations IF the console is properly programmed and has
an
optional internal TS-FM2 Data or Fax Modem
➇
.
The report key can send reports
to either the
optional console
printer
➄
, or to fax machines if
the console is equipped with the
optional
➇
TS-FM2 Fax Modem.
The number of available reports
is extensive and the choices are
presented in a multilevel fashion.
See Chapter 3 Tank Sentinel
Reports for example reports
and descriptions.
Selecting A Report
Press the REPORT key to display the report groups: Press the appropriate menu key under
a report that you want to print or fax. For example, to print a SENSOR ALARM HISTORY
report, press the following keys:
REPORT DOWN M2 (under the ALARM text) M3
(under SENSOR), and finally M3 (under HISTORY).
NOTE
☞
I V
ALARM
8
J W
REPORT
9
(MORE) =
press the
DOWN key to
display more
choices
REGULATORY REPORT
PRINTER FAX
M1 M2 M3 M4
LEFT RIGHT
SELECT REPORT GROUP (MORE)
SENSOR ALARM SETUP REGULATORY
M1 M2 M3 M4
LEFT RIGHT
SELECT REPORT GROUP (MORE)
INVENTORY DELIVERY USAGE TEST
M1 M2 M3 M4
LEFT RIGHT
SELECT SENSOR ALARM STATUS
ACTIVE CLEARED HISTORY
M1 M2 M3 M4
LEFT RIGHT
SELECT ALARM TYPE (MORE)
ALL
M1 M2 M3 M4
LEFT RIGHT
SELECT ALARM TYPE (MORE)
SYSTEM TANK SENSOR LINE
M1 M2 M3 M4
LEFT RIGHT