Extron Electronics System 8_10 Plus - Manual (Page 10)

Extron • System 8/10 P
LUS
• User’s Manual
Introduction to System 8/10 P LUS General
1-1
Introduction
Although each E XTRON System 8/10 P LUS switcher has been factory preset for the
requested projector brand configuration, it can easily be changed to make your
system switcher compatible with any projector brand you choose.
This manual has been carefully written in an effort to provide you with the
detailed information that you need to connect your System 8/10 P
LUS switcher to
most projectors available in today’s market. It covers both the System 8 P LUS
and the System 10 P
LUS
, however, since the only difference between these two
switchers is the number of inputs, they will be referred to as “System 8/10 P LUS ”.
Equipment Description
The Extron System 8/10 P
LUS
switchers are microprocessor controlled with BNC
type input and output connectors for video. The built-in microprocessor provides
for digital control of all major graphics projectors. Video formats supported are:
• Composite Video (NTSC/PAL)
• S-Video/S-VHS (YC)
• RGBS (RGB w/separate composite sync)
• RGsB (RGB w/sync on green)
• RGBHV (RGB w/separate H & V sync)
The switchers also feature stereo audio follow with an attenuation level control
for any of the previously mentioned video input formats. Audio inputs can be
attached through the Phoenix® brand captive screw terminal connectors or
through BNC connectors when using Composite Video and S-Video only.
System 8 PLUS
RS-232 Control Device
SVGA Compatible
Computer
Computer
Interface
Computer
Interface
High Resolution
CAD/CAM Workstation
Computer
Interface
MAC II Computer
Infrared System
Remote
Intercommunication
Port for Multiple
System 8/10 Plus
Switchers
Large Screen Projector
Communication
Cable Projector-Specific
Communications Adapter
Laserdisc Player
NTSC or PAL Video
Cassette Player
Either of 2 Audio
Outputs
Stereo
Amplifier
KP-10 Keypad
Remote Control
Hi C arol
Hi C arol