Extron Electronics PowerCage FOX Tx_Rx HDMI User Guide User Manual
Page 44
Optical loss budget
Singlemode ............................. 13 dB, maximum
Multimode ............................... 7 dB, maximum
Maximum channel data rate ........... 4.25 Gbps
Video — PowerCage FOX Tx/Rx HDMI
NOTE:
Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input and output.
Maximum data rate ........................ 4.25 Gbps
Maximum pixel clock ...................... 165 MHz
Maximum resolution ...................... 1920x1200 or 1080p @ 60 Hz, 8-bit color
Formats .......................................... RGB, YCbCr, xvYCC digital video
Standards ....................................... DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input — PowerCage FOX Tx HDMI
Number/signal type ........................ 1 single link HDMI
Connectors .................................... 1 female 19-pin HDMI type A
Video output — PowerCage FOX Rx HDMI
Number/signal type ........................ 1 single link HDMI
Connectors .................................... 1 female 19-pin HDMI type A
Audio
NOTE:
In PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber
cable, and converted back to analog audio in the receiver.
Gain
Range ...................................... Adjustable, -18 dB to +10 dB
Default .................................... Unbalanced output: -6 dB; balanced output (default): 0 dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.5 dB
THD + Noise ................................... 0.10% @ 1 kHz at nominal level
S/N ................................................. >80 dB at maximum output (unweighted)
CMRR ............................................ 65 dB @ 20 Hz to 20 kHz
Audio bits per sample ..................... 18 bits per channel, 2 channels (L, R)
Sampling rate ................................. 48 kHz
Audio input — PowerCage FOX Tx HDMI
Number/signal type ........................ 1 stereo, unbalanced or
2 mono, unbalanced
Connector ...................................... (1) 3.5 mm mini stereo jack
Impedance ..................................... ≥10k ohms unbalanced, ≥20k ohms balanced
Nominal level ................................. -10 dBV (316 mVrms)
Maximum level ............................... +8.9 dBV, unbalanced at 1% THD+N
NOTE:
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.
Audio output — PowerCage FOX Rx HDMI
Number/signal type ........................ 1 stereo, balanced/unbalanced or
2 mono, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level ................................. -10 dBV (316 mVrms)
Maximum level (Hi-Z) ...................... >+11.0 dBu, balanced at 1% THD+N
Maximum level (600 ohm) .............. >+10.0 dBu, balanced at 1% THD+N
Audio delay .................................... 1.5 frames
PowerCage FOX HDMI • Reference Information
38