Extron Electronics PowerCage FOX Tx_Rx HDMI User Guide - Manual (Page 43)

Reference
Information
This section provides the specifications, part numbers, and installation instructions for the
PowerCage FOX HDMI.
• Specifications
• Part Numbers
• Installing a Board in the Enclosure
Specifications
NOTES : • The PowerCage FOX HDMI boards are not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or
FOX AV models.
• The PowerCage FOX boards are available in singlemode or multimode versions.
• The optional PowerCage FOX boards are class 1 laser products. They meet the safety regulations of IEC-
60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Optical specifications — PowerCage FOX boards, interconnection between
transmitter and receiver
Number/type .................................. 1 singlemode or 1 multimode fiber optic input and output per FOX board, up to 8
double space boards per PowerCage enclosure
NOTE: Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to
transmit HDMI video with HDCP content or return data for bidirectional control/communication.
Connectors .................................... 2 bidirectional LC connectors per FOX board
Operating distance
Singlemode ............................. 30 km (18.75 miles) with singlemode (SM) cables with a SM board
Multimode ............................... 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized MM
cable and a MM board
NOTE: Operating distance is approximate. These are typical distances. The maximum distance may be greater
than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing,
losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength .............. 850 nm for multimode (MM), 1310 nm for singlemode (SM)
Transmission power, singlemode or multimode
-5 dBm, typical
Maximum receiver sensitivity
Singlemode ............................. -18 dBm, typical
Multimode ............................... -12 dBm, typical
37 PowerCage FOX HDMI • Reference Information