Extron Electronics IN1508 User Guide - Manual (Page 63)

Command/response Table for Special Function SIS Commands
The syntax for setting a special function is X/*X?# where X/ is the value or variable
(such as X1* in the second example below), X? is the function number (such as
“2” = “Set input 5 video format” in the set of commands below), and # is the execute
command. To view the settings of a function, use X?#, where X? is the function number.
Command/Response Table for Special Function SIS Commands
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Pan
Pan right –*0# Pan ] Pan right on a zoomed image.
Pan left +*0# Pan ] Pan left on a zoomed image.
Pan up –*1# Pan ] Pan up on a zoomed image.
Pan down +*1# Pan ] Pan down on a zoomed image.
Input 5 video type
Set input video format X1* *2# In5 X1*] Specify the video format connected to
input 5.
Example: 1*2# In51 ] Input 5 is set to progressive video.
View input video format 2# In5 X1*]
Switch mode
Enable fade mode 1*3# Fad1 ] Video fades to black during switches.
Disable fade mode (cut mode) 0*3# Fad0 ] Video cuts from one input to another
during switches.
View fade mode 3# Fad X/] X/ : 1 = fade, 0 = cut.
PIP
Set PIP size X1( *4# Pmd X1(] Set PIP window size.
Example: 2*4# Pmd2 ] PIP window is 1/16 screen size.
View PIP size 4# Pmd X1(]
Set PIP mode on 1*5# Pip1 ]
Set PIP mode off 0*5# Pip0 ]
View PIP mode 5# Pip X$] X$ : 0 = PIP off, 1 = PIP on.
Switcher output settings
Set output sync format X2) *6# Syn X2)] X2) : 0 = Y, B-Y, R-Y.
1 = RGBHV (default).
2 = RGBS.
3 = RGsB.
Example: 1*6# Syn1 ] RGBHV output.
View output sync format 6# Syn X2)]
Set output sync polarity X2! *7# Pol X21] X2! : 0 = H–/V– (default).
1 = H–/V+.
2 = H+/V–.
3 = H+/V+.
Example: 1*7# Pol1 ] H–/V+ polarity.
View output sync polarity 7# Pol X2!]
Blue screen
Set blue screen on
(blue and sync outputs only) 1*8# Blu1 ]
Set blue screen off 0*8# Blu0 ]
View blue screen 8# Blu X$] X$ : 0 = blue screen off, 1 = blue screen on.
Input aspect ratio
Set input aspect ratio on
(blue and sync outputs only) 1*9# Asp1 ]
Set input aspect ratio off 0*9# Asp0 ]
View input aspect ratio 9# Asp X/] X/ : 0 = 4:3, 1 = 16:9.
IN1508 • Programming Guide 58