Extron Electronics IN1508 User Guide - Manual (Page 20)

Remote Control Buttons
To control the switcher with the hand-held IN1508 remote
control (see figure 14), aim the hand-held unit at the IR
detector on the switcher and press the desired buttons on
the remote. The maximum operating range is 30 feet.
i Picture-In-Picture (PIP) buttons — The PIP buttons
function identically to the front panel PIP buttons (see
“
Picture-in-Picture Controls ” and d, on page 12).
On/Off button — The PIP On/Off button toggles the
PIP function on and off. When lit, the front panel PIP
On LED indicates that the picture-in-picture function
of the switcher is on.
Swap button — The PIP Swap button toggles the
primary and secondary pictures between the main
image and the PIP window.
NOTE: If PIP mode is off (the front panel PIP
Mode On LED is off), the Swap function
continues to work, toggling between
the most recently selected low-resolution
input and the most recently selected
high-resolution input. Unlike when PIP
mode is on, however, the unselected
input is not displayed in a PIP window.
j Input Selection buttons — The Input Selection buttons select an input to scale and
output. The front panel Input LEDs indicate the selected input.
The Input Selection buttons function identically to the front panel Input buttons (see
“
Input Controls ” and b on page 10).
k Mute/Freeze buttons — The Mute and Freeze buttons blank the screen and/or silence
the audio and freeze the video. Press the buttons to toggle the mutes and freeze mode
on and off.
Video Mute — The Video Mute button switches the output to a blank screen. The
blank screen is deselected when a new input is selected. On-screen displays are still
available when the video is muted.
NOTE: Video mute mutes the video signals only. Separate H and V sync, composite
sync, or sync-on-green (depending on the output format selected) is always
output to ensure that the connected display does not lose sync.
Audio Mute — The Audio Mute button silences the audio output. The audio mute is
deselected when a new input is selected.
A/V Mute — The A/V Mute button switches the output to a blank screen and silences
the audio output. The blank screen and muted audio are deselected when a new input
is selected.
Freeze — The Freeze button toggles the freeze feature on and off. Freeze stops the
image at the moment you activate the feature and outputs a still image. Freeze is
deselected when a new input is selected.
SIZE
ENTER MENU
CENTER
CONT/
BRT
COL/
TINT
VIDEO
MUTE
AUDIO
MUTE
A/V
MUTE
5 6
ON/OFF
PIP
SWAP
7 8
IN1508
REMOTE
ZOOM PAN
SHARP PHASE
ASPECT
RATIO
FREEZE
12
13
10
9
11
Figure 14. IR Remote Control
IN1508 • Operation 15