Extron Electronics IN1508 User Guide - Manual (Page 37)

Swap selection
The Swap selection toggles the primary and secondary inputs between the main image
and the PIP window. Select swap by highlighting the Swap selection and pressing the Enter
or button. Repeatedly press the Enter or button to toggle between the main and PIP
windows. Press the , , or button to deselect Swap, or allow the menu timeout (from
the final button press) to clear the on-screen displays. The function of this on-screen display
is identical to pressing the front panel Swap button.
NOTE: If PIP mode is off (the front panel PIP Mode On LED off), the Swap function
continues to work, toggling between the most recently selected low-resolution
input and the most recently selected high-resolution input. Unlike when PIP
mode is on, however, the unselected input is not displayed in a PIP window.
PIP Mode selection box
The PIP Mode selection box displays the currently selected size and position for the
picture-in-picture window (if PIP mode is turned on) and allows you to select another size
and position.
NOTE: The two side-by-side options are available only via this menu or an SIS command
(see “ Programming Guide ” on page 58). If either side-by-side option is
selected, the PIP size adjustment does not work.
Use the front panel or IR remote control and buttons to highlight the desired size and
position and press the Enter button.
Fade Switch selection box
The Fade Switch selection box provides the ability to select between cuts and fades when
you select a new input. A fade switch fades the output to black, switches to the new input,
and then fades in from black. A cut selects the new input with no masking affect.
Use the front panel or IR remote control and buttons to select On for fade switches or
Off for cuts and press the Enter button.
Blue Mode selection box
The Blue Mode selection box provides the ability to turn the blue mode feature on and off.
Blue mode is helpful in the setup of the color and tint of the incoming video signal. In the
blue mode, only the sync and blue video signals are passed to the display. Use the front
panel or IR remote control and buttons to select On or Off and press the Enter button.
IN1508 • Operation 32