Extron Electronics DXP HDMI User Guide - Manual (Page 80)

DXP DVI Pro and DXP HDMI Series • Matrix Software 74
3. If you selected IP [LAN] in step 2, the IP Connection window opens.
Figure 72. Address and Password Entry for IP Connection
a. Check the Extron IP Address field in the IP Connection window. The field
displays the last IP address entered for an Extron product.
If the IP address is correct: Proceed to step 3b.
If the address is not correct: Either click in the
Matrix IP Address field and
enter the IP address or click on the scroll down button ( ) and select from among
the recently used addresses.
NOTE: If your local system administrators have not changed the value, the
factory-specified default address, 192.168.254.254 , is the correct
value for this field.
b. If the DXP is password protected, click in the Password field and enter the
appropriate administrator or user password.
c. Click Connect .
• If you logged on using the administrator password, the program connects
you to the DXP switcher with all of the administrator rights and privileges.
• If you logged on with the user password, the program connects you to the
DXP switcher with only user capabilities.
If an incorrect password is entered, the program beeps and returns to the password
entry display for you to enter another password.
4. The Extron Matrix Switchers Control Program matrix window appears. The window
displays the current configuration of the attached matrix, with numbered boxes
representing the video inputs and outputs.
NOTE: Figures 73 and 74 on the next page show a DXP 88 model, which has 8
inputs and 8 outputs. The window for the DXP 88 has 8 input boxes and
8 output boxes each for audio and video.