Extron Electronics DXP HDMI User Guide - Manual (Page 35)

DXP DVI Pro and DXP HDMI Series • Operation 29
2. Press and hold the Preset button until it blinks (approximately 2 seconds).
Press and hold the Preset button until it blinks.
2 seconds
All buttons with assigned presets
light.
If you then save the configuration
to a lit preset number,
the
configuration data at that preset
location will be overwritten.
Preset Assigned
INPUTS
1 2 3 4 5 6 7 8
No Preset Assigned
PRESET PRESET
Figure 38. Enter Save Preset Mode
3. Press and release the input or output button for the desired preset.
C O N T R O L
ESC VIEW
•
• The Enter button blinks
to indicate the need to
save the preset.
The Preset button
continues to blink.
PRESET ENTER
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not saved.
INPUTS
1 2 3 4 5 6 7 8
Figure 39. Select the Preset
4. Press and release the Enter button. The current configuration is now stored in the
selected memory location.
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
save the preset.
All input buttons return to unlit
or background illumination.
Figure 40. Press the Enter Button
Example 6: Recalling a Preset
In the following example, a preset is recalled to become the current configuration. The
steps show the front panel indications that result from your action.
1. Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button blinks once.
Figure 41. Clear All Selections