Extron Electronics DXP HDMI User Guide - Manual (Page 103)

DXP DVI Pro and DXP HDMI Series • Matrix Software 97
• Numbers in I/O boxes — Displays the input and output numbers in the I/O boxes in
the matrix window. You are not able to place icons in the boxes when this option is
selected.
Figure 97. I/O Boxes Containing the Input and Output Numbers
• Catch FPC/other’s Changes — When checked, sets the switcher to report
all configuration and setting changes to the Remote RS232/RS422 or Ethernet
port connection through which this selection was made. These reports allow the
Matrix Switcher Control Program to track the changes that occur in the switcher
configuration and settings, whether commanded via the front panel, the Remote
RS-232/RS-422 port, or the Ethernet port.
Master-Reset button
The Master-Reset button on the menu bar clears all ties and presets, all output mutes,
and all I/O grouping.
NOTE: This button does not reset the Internet protocol (IP) settings.
Help menu
From this menu you can open the Matrix Switcher Control Program help file.
IP Connection Serial Connection