Extron Electronics DXP HDMI User Guide - Manual (Page 57)

DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control 51
] Password:
The switcher initiates the password message immediately after the copyright message
when the controlling system is connected using TCP/IP or Telnet and the switcher is
password protected. This message means that the switcher requires an administrator or
user level password before it will respond to the commands entered via this link.
NOTE: The Password prompt is redisplayed if an incorrect password is entered.
] Login Administrator ]
] Login User ]
The switcher initiates the login message when a correct administrator or user password
has been entered. If the user and administrator passwords are the same, the switcher
defaults to administrator privileges.
Qik ]
The switcher initiates the Qik message when a front panel switching operation has
occurred.
Rprnn ]
The switcher initiates the Rpr message when a memory preset has been recalled from the
front panel. “
nn ” is the preset number.
Sprnn ]
The switcher initiates the Spr message when a memory preset has been saved from the
front panel. “
nn ” is the preset number.
Vmtn ]
The switcher initiates the Vmt message when a video output mute is toggled on or off
from the front panel. “
n ” is the mute status: 1 = on, 0 = off.
Amtn ]
The switcher initiates the Vmt message when a video output mute is toggled on or off
from the front panel. “
n ” is the mute status: 1 = on, 0 = off.
Exen ]
The switcher initiates the Exe message when executive mode is toggled on or off from the
front panel. “
n ” is the executive mode status: 0 = front panel unlocked, 1 = all front panel
functions locked, 2 = only advanced functions locked.